Chip removal for new levels of performance
Industrial production requires reliable performance. Schelling's fk 8 is the right choice for this. With it, you can cut various plastics in an extremely productive and superbly exact way.
The integrated turning device in front of the saw ensures a productivity plus of around 15 %. The CLEAN-UP system realises chip removal and the dust protection equipment realises additional cleanliness. Solid construction and a 34 kW drive are the necessary basis for this highly modern machine concept.
Outstanding features
- 34 kW motor output - high-performance for all cutting requirements
- Precise dimensional accuracy
- Solid machine construction for vibration-free cuts
- 99.5% chip-free
- Short cycle times for high material throughput
| Feeder travel speed: | ||
| forward | 0 – 80 m/min | 0 – 262 ft/min |
| back | 0 – 80 m/min | 0 – 262 ft/min |
| Saw travel speed: | ||
| forward | 0 – 80 m/min | 0 – 262 ft/min |
| back | 0 – 80 m/min | 0 – 262 ft/min |
| Clamp opening: | ||
| 155 mm | 6.1" |
| Main saw motor power: | ||
| 34 kW | 45 HP |
| Main saw blade: | ||
| Diameter max. | 520 mm | 20.5" |
| Projection max. | 165 mm | 6.5" |
| Cutting heigth | dep. on material/blade type |
| Cutting length: | ||
| fk 8 330 | 3,300 mm | 130" |
| fk 8 430 | 4,300 mm | 169" |
| Weight: | ||
| fk 8 330 | Approx. 9,200 kg | 20,240 lbs |
| fk 8 430 | Approx. 10,200 kg | 22,440 lbs |
- fk 8 - closed pressure beam with integrated hold-down and dust protection device
- fk 8 - hard-chromed machine table with integrated air bed - automatic material push out
- fk 8 - Schelling turntable solution increases productivity 15%
