Final cut with little burr for thin laminates up to 0.01 mm
As varied as the requirements for circuit board materials are, so adaptable is Schelling's saw technology. The fp 4 is precise and clean. Finished cuts with little burr are realised for thin laminates down to a thickness of 0.01 mm.
Not only is it accurate, but also productive. Speed, precision, easy handling and reduction of the necessity for follow-up work make them the favourite choice of many demanding industrial users.
Outstanding features
- Highest dimensional and angular accuracy due to aligning system
- Dust-free due to closed system
- Reduced burrs due to clean finish cut
- 15 kW saw motor output – efficient and precise
- Simplest handling due to automation
- Corner rounding for the simplest processes and handling
- Know how from over 25 years of laminate cutting saws
- Short cutting cycle times due to cutting length automatic
| Feeder travel speed: | ||
| forward | 0 – 30 m/min | 0 – 98 ft/min |
| back | 0 – 30 m/min | 0 – 98 ft/min |
| Saw travel speed: | ||
| forward | 0 – 60 m/min | 0 – 197 ft/min |
| back | 0 – 60 m/min | 0 – 197 ft/min |
| Clamp opening: | ||
| 90 mm | 3 1/2“ |
| Main saw motor power: | ||
| 15 kW | 20,5 HP |
| Main saw blade: | ||
| Diameter | 300 mm / 350 mm | 11 4/5“ / 11 1/7“ |
| Projection | 70 mm | 2 3/4“ |
| Max. book height | FR2 50 mm | 2" |
| FR4 32 mm | 1 1/4" |
| Cutting length: | ||
| fp 4 130 | 1,320 mm | 52" |
| Weight: | ||
| fp 4 130 | ca. 6,000 kg | 13,200 lbs |
- fp 4 - clamps
- fp 4 - chiplessness through closed system
- fp 4 - highest angular accuracy through strip aligner
- fp 4 - corner rounding
- fp 4 - Highest productivity with preparation table
