Customer requirement: The material must pass through the production process with minimal buffer storage and very short throughput times. All cut parts, individual panels and stacks must be 100% within the specified measurement tolerances (+/- 0.2 mm). Handling as general contractor, that is, overall concept, from saw technology to material logistics on through to system software.
Schelling solution:The Schelling Standard FMH with standard precision package and individually-developed Schelling waste management.
.

The customer's requirement: High productivity in a small space. Complex cut plans with head cut and displacement in the head and main part. Highest panel usage.
Schelling solution: With a custom-tailored concept, we were able to design a system optimally adapted for the hall and performance requirements. The system achieves the high performance demanded with max. stack heights and stacking regardless of the cut.

Customer requirement: Homanit is specialized in the production of thin panels in various configurations. Therefore they needed a plant able feed thin panels down to a thickness of 1.5mm at high speeds. Homanit also needed optimal material protection for sensitive surfaces.
Schelling solution: A plant specially adapted with a vacuum/nip roller infeed system for thin panels with 20 infeed cycles per minute for panels down to min. 1.5 mm thickness. Also included is a smooth material transport for sensitive panel surfaces with polyamide rolls calibrated exactly as well as hard chrome plated machine tables with a table sealing system.

Customer requirements: KORNMÜLLER in Weistrach/Austria is a niche supplier for specialist kitchens using a wide range of surfaces. The requirement is to provide a cost-effective connection between the board store and the Schelling cut-to-size saw whilst also managing the utilisation of rest cuts.
Schelling solution: The overall concept comprises an automatic board storage system with automatic rest part return function which also integrates a Schelling fh 6 cut-to-size saw with moving aligning-table and FXH as well as the Schelling XBoB for managing smaller rest cuts. Schelling has realized this project in collaboration with AW Bearbeitungssysteme, 3Tec, Systraplan and Hova.

Customer requirement: KAINDL is a worldwide leading producer of refined timber materials and laminated floors. For the cut not only capacity (approx 600 m³/d) and flexibility for smaller lot sizes are required, but also dimensional accuracy and a careful transport of plates with sensitive surfaces.
Schelling solution: The angular cut-to-size plant designed by Schelling with head cut device, four automatic stacking stations and a binding device corresponds to the specifications and guarantees through the sophisticated concept highest availability.

Customer requirement: Bruno Piatti AG in Dietlikon/Switzerland is the most modern industrial kitchen manufacturer in Switzerland. The company requirements are for latest cutting technology, together with utilisation of the existing space. Focus is on cutting to size white board corpus products with the full book height.
Schelling Solution: The ah 8 enables the cutting of coated panels. The angular plant with automatic stacking is set up for a full capacity of up to 20 m³/hour. Production is organised over two shifts. In addition to this system, the Piatti cutting centre also utilises the panel cut-to-size saw fh 6 from Schelling.

Customer requirement:
Cuisines Schmidt - one of the largest kitchenware manufacturers in Europe produces customer-specific furniture with the shortest delivery times. Cut of 4200 panels/day, shortest and most logistically-efficient material throughput.
Schelling solution: “Together we designed an ideal concept which fulfilled our requirements in all details according to project", director Cuisines Schmidt Mr. Offner. The new system enables optimal production flow and commissioned production with the highest throughput speed.
.

Customer requirement: Decisive was our good experience with the existing Schelling system, the new Schelling PLUS+ concept, advising by the Schelling specialists, the short delivery time and a good market price, reports the Kaufmann plant manager Mr. Baurenhas with enthusiasm.
Schelling solution: The newest innovation - with PLUS+ stack height and PLUS+ power, the new concept delivers still more power. Stack heights up to 135mm and still higher feed speeds permit the cut of 35m³/h.

Customer requirement:GETA in Wangen Germany specialises in technical solutions for public transport. For interior fittings in industry, medical technology and vehicle interiors 250 wooden materials of varying compositions are used in practice. An efficient cutting solution is required for a wide variety of wooden board types in small quantities.
Schelling Solution: The Schelling's fh 6 Cut-To-Size Saw has been customised to meet the individual customer's needs. Together with GETA, an optimization concept was developed which allows the cutting of multiple board types.

Customer requirements: KASTENS & KNAUER in Lilienthal/Germany is a supplier to the Automotive and Aerospace industries. Utmost precision, speed and flexibility are demanded. The requirement is to cut large-format 200 mm thick aluminium plates with a maximum length of up to 6,000 mm.
Schelling solution: The FTM and FLM precision plate saws are adapted to individual customer needs, whereby cutting volume and productivity are taken into account. This allows the rapid production of large-dimension parts as well as the high-volume production of components and products. 

Customer requirement: faigle Industrieplast in Hard, Austria specializes in the distribution of semi-finished products. All types of technical plastic materials are processed, most recently PMMA and polycarbonate. There is a demand for the highest precision in cutting, high cutting speed and scratch-free handling of sheets.
Schelling Solution: With the implementation of the Schelling PLUS⁺ concept, the Schelling precision saw fk 6 fulfills these requirements. Individual customer requirements have been considered and integrated throughout the development of the fk 6 project. Careful sheet handling and over 99.5% cleanliness from chips and dust is a focal special feature.